04465-60280 PAD KIT, DISC BRAKE, FRONT Fits Toyota Land Cruiser Lexus LX570

Product Description

Product Function Description

The front disc brake pad kit is a critical safety component of your Toyota vehicle‘s braking system. Brake pads are the friction material that presses against the brake rotor when you apply the brakes, creating the friction necessary to slow and stop your vehicle. The front brakes handle approximately 60-70% of the vehicle’s braking force, making the quality and condition of front brake pads essential for safe stopping performance. This pad kit is designed to provide reliable, consistent braking performance with minimal noise and dust. Manufactured to factory specifications with high-quality friction material, this kit ensures proper fit, even pad wear, and dependable stopping power for your Toyota vehicle under all driving conditions.

When Should You Replace It?

Consider replacing your front brake pad kit if you experience any of the following symptoms: Squealing, screeching, or grinding noise when applying the brakes. Brake pedal feels soft, spongy, or requires more pressure than usual. Vehicle takes longer to stop – increased stopping distance. Steering wheel vibrates or pulsates during braking. Brake warning light appears on the dashboard. Visible pad wear – pad thickness is less than 3mm. Uneven pad wear on the inner vs outer pad. Squeaking or chirping noise while driving that stops when braking. The vehicle pulls to one side during braking. Brake dust excessively dark or metallic particles visible. Brake fluid level low without external leaks. Note: Brake pads should be inspected regularly and replaced when worn to maintain safe braking performance.

Product Specifications

Package Contents

1 x Front Disc Brake Pad Kit – Includes 4 Brake Pads, Shim Kit, and Wear Indicator Clips. Note: Brake rotors, calipers, and mounting hardware are NOT included. Brake fluid is NOT included. Please confirm pad material and compatibility with your Toyota model before purchasing.

Installation Tips

Important: The brake system is a critical safety system. Professional installation is strongly recommended. Safely raise the vehicle and support it on jack stands. Remove the front wheels. Remove the brake caliper and bracket. Remove the old brake pads and inspect the brake rotors for wear. Clean the caliper and bracket thoroughly – remove all dust and debris. Compress the caliper piston using a brake piston tool to make room for the new, thicker pads. Install the new brake pads with the included shims and wear indicator clips. Reinstall the caliper and tighten mounting bolts to factory torque specifications. Pump the brake pedal several times before driving to ensure the pads are seated against the rotors. Bed-in the new pads by performing several moderate stops from 30-50 km/h to transfer a layer of friction material to the rotors. Check the brake fluid level and top up if necessary. Critical Step: After installation, test the brakes at low speed to ensure proper stopping and no pulling. Professional installation is highly recommended.

After-Sales Service & Warranty

This product is covered by our quality assurance. If you have any questions or issues regarding fitment or quality, please contact us and we will respond within 24 hours.

Recommended Related Products

Brake Rotors (Front) / Brake Caliper / Brake Fluid / Brake Cleaner / Brake Grease / Brake Bleeder Kit