47748-60040 SPRING, ANTI-RATTLE For Front Fits Toyota Land Cruiser Lexus

Product Description

Product Function Description

The anti-rattle spring is a critical hardware component within your Toyota vehicle‘s front disc brake system. This spring applies tension to the brake pads within the caliper assembly, holding them firmly against the caliper brackets to prevent vibration, rattling, and squealing during normal driving. When you are not pressing the brake pedal, this spring keeps the pads slightly retracted and stable, preventing them from chattering against the rotor and reducing unwanted brake noise. For Toyota vehicles equipped with front disc brakes, a properly functioning anti-rattle spring ensures quiet brake operation, consistent pad positioning, and reduced brake pad wear from unnecessary vibration. This spring is manufactured to exact dimensional specifications, ensuring proper tension and reliable performance within the caliper assembly.

When Should You Replace It?

Consider replacing your anti-rattle spring if you experience any of the following symptoms: Rattling, clunking, or clicking noise coming from the front brakes, especially when driving over bumps or rough roads. Brake squeal or squeaking that does not resolve with new brake pads alone. Visible corrosion, rust, or deformation of the spring. The spring has lost its tension and feels loose when installed. Visible wear or fatigue of the spring material. Broken, cracked, or damaged spring. You are replacing brake pads – anti-rattle springs should be inspected and replaced if worn. Difficulty removing or installing the spring during brake service. The spring no longer holds the brake pads firmly in position. You are rebuilding or servicing the front brake calipers. Note: Anti-rattle springs are small but critical hardware items that should be inspected during brake service and replaced if signs of wear, corrosion, or loss of tension are present.

Vehicle Fitment

Why Choose This Anti-Rattle Spring?

Factory Specification Quality – This anti-rattle spring is manufactured to the exact dimensional and tension standards of the original brake hardware component, ensuring proper fit and reliable vibration-damping performance within the caliper assembly.

Eliminates Brake Noise – Worn or corroded springs lose their tension, allowing the brake pads to vibrate and rattle against the caliper brackets. This new spring restores proper pad tension, eliminating rattling, clunking, and squealing noises .

Essential for Brake Service – When replacing brake pads, installing new anti-rattle springs ensures the new pads operate correctly and the brake hardware performs reliably.

Restores Proper Pad Positioning – The anti-rattle spring holds the brake pads firmly in position, preventing unnecessary movement that can cause uneven pad wear and reduced braking performance.

Direct Replacement – Precision-engineered to match the original spring specifications. Direct replacement – no modifications required.

Corrosion-Resistant Design – Manufactured with spring steel and corrosion-resistant coating, this spring is designed to withstand exposure to moisture, road salt, and brake dust .

Cost-Effective Maintenance – This small but critical hardware item is an affordable replacement that helps ensure quiet and reliable brake operation.

Package Contents

1 x Anti-Rattle Spring (47748-60040). Note: This is for one spring only – each vehicle requires 2 springs for a complete front brake service. Brake pads, calipers, and other hardware are NOT included. Please confirm compatibility with your Toyota model before purchasing.

Installation Tips

Important: The brake system is a critical safety system. Professional installation is strongly recommended. Safely raise the vehicle and support it on jack stands. Remove the front wheel on the side you are working on. Remove the brake caliper from the vehicle. Carefully remove the old anti-rattle spring from the caliper. Clean the spring mounting area – remove all old debris and corrosion. Install the new spring by pressing or clipping it securely into position. Ensure the spring is properly seated and applies even tension to the brake pads. If replacing brake pads, install new pads before installing the spring. Reinstall the caliper onto the vehicle. Critical Step: Test the brake pedal for firmness before driving. Check that the spring is securely in place and properly tensions the pads. Professional installation is highly recommended if you are not familiar with brake system repairs.

After-Sales Service & Warranty

This product is covered by our quality assurance. If you have any questions or issues regarding fitment or quality, please contact us and we will respond within 24 hours.

Recommended Related Products

Front Brake Pad Kit / Brake Caliper Pin Set / Caliper Retainer / Brake Rotors