95560-81A01 Condenser Fan Assembly Fits 9556081A01 Suzuki Jimny 1.3L M13A JB23 JB33

Product Function Description

The condenser fan assembly is a critical component of your Suzuki Jimny's air conditioning and cooling system. Its primary function is to draw air through the condenser to dissipate heat from the refrigerant, enabling the A/C system to cool the cabin effectively. For the third-generation Suzuki Jimny (1998-2018) with the 1.3L M13A engine, a properly functioning condenser fan is essential for maintaining A/C performance, especially in hot weather or during low-speed driving where natural airflow is insufficient. This component operates on a 12V electrical system and is designed to factory specifications, ensuring proper fit and reliable cooling system performance.

Common Symptoms of a Failing Condenser Fan

If you are experiencing any of the following symptoms, your condenser fan assembly may be failing and in need of replacement:

• A/C not cooling sufficiently: The air conditioning blows warm or only slightly cool air, especially at idle or in traffic – this occurs when the fan is not drawing enough air through the condenser

• Fan not running: The condenser fan does not turn on when the A/C is activated

• Unusual fan noise: Grinding, squealing, or rattling noises coming from the fan motor – this indicates bearing wear or debris in the fan

• Intermittent fan operation: The fan works sometimes but fails at other times – this suggests a failing motor or loose connection

• A/C system overheating: The air conditioning system cycles on and off frequently or shuts down completely due to high pressure – this occurs when the condenser is not receiving adequate airflow

• Engine overheating: The engine temperature rises when the A/C is on – this indicates insufficient airflow through the radiator as well

If you have confirmed these symptoms through inspection, replacing the condenser fan assembly is the recommended solution.

Product Specifications

Why Choose This Condenser Fan Assembly?

Restores A/C Performance – A failing condenser fan prevents the A/C system from dissipating heat effectively. This new fan restores proper airflow for cold, consistent A/C performance.

Prevents A/C System Damage – Insufficient condenser airflow can cause the A/C system to run at abnormally high pressures, potentially damaging the compressor. Replacing a failing fan early protects your A/C system.

Direct Replacement – Precision-engineered to match the original fan specifications. Direct bolt-on replacement – no modifications required. Includes the fan motor and blade assembly.

Proven Compatibility – This fan is confirmed compatible with third-generation Jimny (1998-2018) with M13A engine. This part number supersedes 95560-81A00 and 95560-63G40.

Quality Construction – Manufactured with reliable electric motor and durable fan blade to withstand demanding operating conditions and provide long service life.

Package Contents

1 x Condenser Fan Assembly (includes motor and fan blade). Note:  Please confirm compatibility with your Jimny model and year before purchasing. Verify your vehicle's original part number before ordering.

Common Misconceptions About Condenser Fans

Myth 1: "If the A/C is blowing cold while driving, the fan is fine."
Fact: The condenser fan is most critical at idle or low speeds. The fan may be failing even if the A/C works on the highway where natural airflow is sufficient.

Myth 2: "A noisy fan just needs to be cleaned."
Fact: Grinding or squealing noises usually indicate bearing wear in the motor, which cannot be repaired by cleaning – the fan assembly must be replaced.

Myth 3: "Any 12V fan will work as long as it fits."
Fact: The condenser fan must match the vehicle's airflow direction, mounting configuration, and electrical specifications. Using an incorrect fan will result in poor cooling and potential damage.

Common Customer Concerns & Our Solutions

We understand that purchasing a condenser fan assembly can raise questions and concerns. Here is how we address the most common issues our customers face:

"How do I know the A/C blowing warm is from the fan and not low gas?" – If the A/C is weak only at idle but works on the highway, the fan is usually the culprit. Low gas tends to cause poor cooling in all conditions. Check if the fan turns when the A/C is switched on.

"Can I test the fan without a multimeter?" – With the engine off and key in the ON position, switch on the A/C – if the fan does not spin but you hear the A/C clutch click, the fan motor is likely faulty. For a more definitive test, a multimeter can check for power at the fan connector.

"If I replace the fan, will my A/C start blowing cold again?" – If the fan was the only issue, yes. If the system is low on refrigerant or has a faulty compressor, the fan replacement alone will not resolve the issue. However, a non-running fan is one of the most common causes of weak A/C.

"What if the part arrives damaged or doesn't meet quality expectations?" – We know your time is money. Every shipment is inspected before dispatch, and we stand behind our products with a quality assurance policy. If a part ever arrives defective, we'll arrange a replacement immediately.

Quality Assurance & Service Commitment

Quality Assurance:
Every component is manufactured under controlled production processes to ensure consistent dimensional accuracy and material integrity. Each unit undergoes the following quality checks before packaging:

• Electrical test – fan motor operation is verified

• Balance test – smooth, vibration-free operation is confirmed

• Dimensional inspection – mounting points and connector fitment are verified

• Surface finish inspection – component quality is visually verified

Packaging Protection:
Each condenser fan is individually sealed in protective packaging to prevent contamination and physical damage during storage and transit. The packaging includes a clear part number label for easy identification.

Service Commitment:

Related Product Recommendations

When replacing the condenser fan, it is often recommended to inspect and consider replacing the following related components at the same time.

A/C Condenser – The condenser and fan work together. If the condenser is damaged, clogged, or has bent fins, the fan's efficiency is reduced even if the fan is new. Aluminum replacement condensers are available for Jimny 1.3 16V 4x4 .

Radiator / Radiator Cooling Fan – The Jimny has both a condenser fan and a radiator fan. If the condenser fan is failing, the radiator fan may also be approaching the end of its service life. Radiators are available for Jimny (98-) 1.3 16V 4WD with aluminum construction .

Coolant Temperature Sensor (ECT) – The ECT sensor signals the ECU to control fan speed. A faulty sensor can prevent the fan from turning on at the correct temperature, even if the fan itself is good . If the fan only fails intermittently, the sensor may be suspect.

Thermostat – A defective thermostat that does not allow the engine to reach proper temperature may prevent the radiator fan from activating at the correct time . If cooling system issues persist after fan replacement, the thermostat should be checked.