37230-42010 Drive Shaft Center Support Bearing Fits TOYOTA RAV4 SXA10 1995-1999

Product Description

Product Function Description

The drive shaft center support bearing is a critical component of your Toyota RAV4‘s drivetrain system. On vehicles with a two-piece drive shaft, this bearing is mounted in the center of the shaft to support the drive shaft and reduce vibration as it rotates. It acts as a central mounting point that allows the drive shaft to spin smoothly while accommodating the movement of the vehicle’s suspension. For a compact SUV like the RAV4 SXA10, which is often used for both city driving and light off-road adventures, a properly functioning center support bearing ensures smooth power delivery from the transmission to the rear wheels, reducing driveline vibration and noise. A worn or failing bearing causes annoying vibrations, especially at highway speeds, and can lead to driveline damage if left unaddressed.

When Should You Replace It?

Consider replacing your drive shaft center support bearing if you experience any of the following symptoms: Vibrations felt through the vehicle floor or seats, especially when accelerating or at highway speeds (60-80 km/h and above). A whining, humming, or rumbling noise coming from underneath the vehicle, particularly in the center area. Clunking or knocking noise when shifting gears or during sudden acceleration/deceleration. Excessive driveline play or looseness felt when the vehicle is in gear. Visible wear, cracking, or deterioration of the rubber support bushing. Grease leaking from the bearing area. The vehicle vibrates under load, but vibration decreases when coasting. The center support bearing rubber mount appears sagging or broken. Increased noise from the driveline during cornering. Vibrations that change with vehicle speed, not engine RPM.

Product Specifications

Package Contents

1 x Drive Shaft Center Support Bearing Assembly (Complete with Bracket and Rubber Mount). Note: This is the complete center support assembly. The drive shaft is NOT included. Please confirm compatibility with your RAV4 SXA10 model and drivetrain before purchasing. Mounting bolts are NOT included – please reuse original hardware.

Installation Tips

Important: Replacing the center support bearing requires working under the vehicle. Professional installation is recommended. Safely raise the vehicle and support it on jack stands. Mark the drive shaft and differential flanges before removal to maintain balance and alignment. Remove the exhaust heat shields if needed for access. Remove the rear drive shaft section by unbolting it from the differential. Remove the front drive shaft section by unbolting it from the transmission output shaft and the center support bracket. Remove the old center support bearing from the drive shaft – note the original position and orientation. Mark the position of the old bearing on the drive shaft before removal. Install the new center support bearing assembly in the same position as the original – correct alignment is critical. Reinstall the front drive shaft section and tighten to factory torque specifications. Reinstall the rear section, aligning the marks you made. Reinstall exhaust heat shields. Lower the vehicle. Critical Step: After installation, check the drive shaft alignment and ensure all bolts are torqued to factory specifications. A test drive is essential to confirm vibrations are eliminated. Professional installation is highly recommended.

After-Sales Service & Warranty

We stand behind the quality of our products. This drive shaft center support bearing comes with a 12-month warranty against manufacturing defects. If you have any questions or issues, please contact us and we will respond within 24 hours.

Recommended Related Products

U-Joint / Drive Shaft / Transmission Mount

If you need more recommendations, please feel free to contact us.